Elecylinder Series

What is an electric actuator?

Electric (electromechanical) actuators are motion units that are driven by electric motors without using any pressurized fluid (air, oil) power, and position, speed, acceleration and force can be defined via control units. They can operate with AC or DC current as well as have a Servo or Step motor. They provide high position precision thanks to the encoder on the motor.

EleCylinder is the name of the latest series of electric cylinders for the fast and inexpensive transition to compressed air-free production. In addition, the Elecylinder, which provides 2 adjustable positions and energy saving, offers a much wider performance range than pneumatic cylinders.EleCylinder is the name of the latest series of electric cylinders for the fast and inexpensive transition to compressed air-free production. In addition, the Elecylinder, which provides 2 adjustable positions and energy saving, offers a much wider performance range than pneumatic cylinders.

Thanks to the control unit integrated in the body, it provides stable speed not only at high speeds but also at very low speeds. Very low gradual acceleration and very low gradual deceleration, which are almost impossible in pneumatic actuators, are no longer a problem thanks to the Elecylinder.

60% -90% more efficient than pneumatic actuators

Numerous scientific studies and experiments have shown that up to 90% gain can be achieved by using electromechanical actuators instead of pneumatic actuators. The high level of losses that occur during the production and transport of compressed air can only be optimized to a very limited extent due to technical limits.

Quick and Easy Programming

Thanks to the integrated control unit, Elecylinder can be programmed very easily and according to the application requirements, movement speed, departure and stop acceleration can be adjusted to each destination.

As with all other IAI electric actuator models, the new Elecylinder products provide speed stability even at the lowest speeds.

Radial Cylinder – for both vertical and eccentric loads

The radial cylinder has an integrated ball bearing system within the body. In this way, it does not need external bearing for neither vertical nor eccentric loads.

Since the actuator piston is supported thanks to the integrated bearing system, no lateral movement occurs at the piston end. In addition, since there is no need for external bearing, it allows use in very narrow areas.Radial Cylinder – for both vertical and eccentric loads

High strength Radial Cylinder

While Radial Cylinders have 2 rows of ball bearings, high strength Radial Cylinders have 4 rows of ball bearings. In this way, the moment strength increases 3 times in slide types and 2.5 times in piston type products compared to the standard product.

Wireless Communication

Elecylinder series can communicate wirelessly with TB-03 touch panel. In this way, the user can reprogram the Elecylinder unit placed in the most difficult areas without the need for any cabling.

Serviceability

All alarms that occur in case of any problem can be remotely monitored. It is very easy to take action according to the alarm situations that occur.

When necessary, motor or body change can be done by loosening a single screw. You can make the whole change yourself without even needing to get service to change the motor, driver or body.

Digital Speed Control Panel

Thanks to a touch panel on the Elecylinder, all position, speed and acceleration settings can be made directly on the product. No other software or hardware is required.