Have you not heard the name of Acry’tron 007 before? If you are looking for the answer to the question “What is the best metal/metal adhesive?” you are in the right address! Acry’tron 007 is an acrylic-based structural adhesive, making a name for itself with its strong adhesion and wide usage of network.
ACRYTRON 007 ACRYLATE BASED STRUCTURAL ADHESIVE
Have you not heard the name of Acry’tron 007 before? If you are looking for the answer to the question “What is the best metal/metal adhesive?” you are in the right address!
Acry’tron 007 is an acrylic-based structural adhesive, making a name for itself with its strong adhesion and wide usage of network.
It has the property of bonding plenty of materials like steel, stainless-teel, copper, aluminium, composite aluminium, brass, nickel, chromium, zinc, wood, glass, concrete, hard PVC, epoxy FRP, phenolic FRP, stone, coated metal, furnace painted & dust painted with themselves and/or with other materials.
Acry’tron 007, which is used with its specially produced gun and is resistant to high temperatures, is a structural adhesive that does not require pre-mixing and can make every kind of mixture with its mixer tips.
Acry’tron 007, has an initial curing time at 4-5 minutes, its functional curing time is at 45-60 minutes and its final curing time is at 24 hours, Acrytron 007 is 100% acrylic-based and have a viscosity between 2000-4000 cps.
Acry’tron 007, which takes place in the most preferred metal bonding adhesives, has high heat resistance and impact resistance.
HOW ACRY’TRON 007 STRUCTURAL ADHESIVE IS USED?
The usage of Acrytron 007, is quite simplistic. First, the product is kept in a vertical position on a flat surface, provided that the pushing pistons are at the bottom. The process continues until the pink / green coloured materials flow from both ends. When flowing is achieved the product is ready to use.
The recommended method for the application of the adhesive is as follows; the surface to be applied must be cleaned with a volatile alcohol, the product must be dispensed to the surface with a 30–45-degree angle and in a way where two products will be on top of each other, (pink part on top of green part or vice versa). If the coloured ingredients are applied to the left and right, the colours must be mixed with each other. Later, the pieces to be adhered must be placed to the surface with the adhesive and after performing the necessary calibrations it must be pressed with clamp if necessary.
The product must be left to dry off after this process takes 5- 10 minutes. If another process will be applied on the product, you can continue your process by separating it from the clamp. The adhesive reaches its test values after 24 hours.
After completing the process, the product must be conserved by putting the tip back on. Since there will not be curing when the ingredients are not mixed, the product can wait as ready to use. You can conserve it under room temperature.
THE ADVANTAGES OF ACRY’TRON 007 STRUCTURAL ADHESIVE COMPARING TO OTHER BONDING METHODS
| Other Acrylic-Based Adhesives | Acry’tron 007 |
| In comparison with other acrylic based products, consisting of two material & used with activators, has external mixing and/or delicate mixing ratios. The special tips for the mixtures like 10:1, 7:1 & 5:1 are expensive and the adhesive which cures on the tips increases the price. | Acry’tron 007 adhesive does not require any mixing. Mixing tip can be used for very precise processes and/or in situations where the colours are important, but these tips are small and they do not create losses that effects the material expenditures. |
| Epoxy-Based Adhesives | Acry’tron 007 |
| A pre-preparation is required on the surfaces to be adhered. Also, it is necessary to mix the hardening and adhesive materials perfectly. Its temperature and impact resistance is weak. | Acry’tron 007 strong adhesive does not require any pre surface preparation. The mixture ratios are not important. They have excellent heat and impact resistances. |
| Rivets | Acry’tron 007 |
| A heavy workmanship and material distortion is at stake. | Acry’tron 007 structoral adhesive is applied easily without requiring any special craftsmanship. It does not damage the material. |
| Welding | Acry’tron 007 |
| Welding and stich done on the front surfaces damages the material and creates a visual pollution. After the welding process, chipping, re-painting and re-coating processes are applied. | Acry’tron 007 adhesive does not harm the surface it is applied on. It can be safely applied on the surfaces that were coated or painted before. |
| Tensol and Chloroform | Acry’tron 007 |
| They are used on the connections that polycarbonate and acrylic type materials have between them. However, they are not used on connections with metals, wood and other materials. The steam they produce is heavily cancerogenic. | Acry’tron 007 strong adhesive can bond polycarbonate and acrylic type of materials with any other material and/or with each other. |
| Sticky Tapes | Acry’tron 007 |
| Its bonding quality depends on the cleanliness of the surface on which it is applied. They are not resistant to heat. After adhesion they cannot be calibrated. | Acry’tron 007 metal adhesive is heat-resistant and allows calibration. |
ACRY’TRON 007 STRONG METAL ADHESIVE Technical Data
| Technical Properties | |
|
Base
|
Acrylic |
|
Viscosity (cps)
|
2000-4000
|
|
Initial Cure (min)
|
3-5
|
|
Functional Cure (min)
|
45-60
|
|
Full Cure (hour)
|
24
|
|
Temperature Resistance (°C)
|
-40 , +150
|
|
Gap Filling (mm)
|
0,5
|
| Materials That Can be Used With Acry’tron 007 | ||
| Steel | Zinc | Ferrite |
| Aluminium | Polyester | Acrylic |
| Copper |
Hard PVC
|
Wood
|
| Stainless Steel |
ABS
|
Glass
|
| Brass (paddy) |
Styrol
|
Mirror
|
|
Chromium
|
Epoxy FRP
|
Stone
|
| Nickel |
PhenolicFRP
|
Concrete |
